Electronic Cutting Machines for Paper: Mats, Blades, Files, Test Cuts
On the table
- Electronic cutting machine with its design software installed
- Light-grip and standard-grip mats, 12 x 12 in
- Fine-point blade, plus a spare
- Deep-point blade for chipboard and heavy stock (optional)
- Scraper and thin spatula for lifting cuts
- Weeding hook
- Smooth cardstock, 65–80 lb
An electronic cutter is a plotter with a knife in its pen holder. The machine pulls a sticky mat back and forth under a carriage while the carriage slides side to side, and between those two movements the blade can follow any line in a file. Cricut, Silhouette and the Brother ScanNCut are the machines most paper crafters mean by the term; the ScanNCut adds a built-in scanner that reads a drawing or a stamped image placed on the mat and cuts around it.
What these machines give up compared with a manual roller machine is speed of setup. A die is ready the moment it is out of the drawer. A cut file has to be sized, assigned a material setting, sent from software and tested. In exchange there is no limit on shapes and no cost per new design. The die cutting machines section sets the two families side by side for anyone still choosing.
Four stages from file to cut
Every job on every brand runs through the same stages, whatever the software calls them:
- Design: draw, import or type the shape in the machine’s software and set its final size in inches.
- Mat: smooth the cardstock onto a mat whose grip suits it, with the top left corner of the sheet in the top left corner of the grid.
- Material: choose a preset for the cardstock or a custom setting you saved earlier, and fit the matching blade.
- Cut and unload: send the job, let it finish, unload the mat, and lift the paper off it.
Most cutting problems trace back to stage 2 or 3. A design that looks right on screen will tear if the mat lets the paper slide or the setting is wrong for that stock.
How much grip the paper wants
Mats come in grip strengths, and the mistake to avoid is using the stickiest one for everything. A mat that holds too hard curls thin paper or pulls the surface off it when you lift the cut.
| Grip | Material | Notes |
|---|---|---|
| Light | Printer paper, vellum, thin patterned paper | Lets fragile sheets release without tearing |
| Standard | Cardstock up to about 80 lb, most patterned paper | The everyday mat for card making |
| Strong | Heavy cardstock, glitter cardstock, chipboard, magnet sheet | Holds dense material that would shift on a weaker mat |
Cricut color-codes its mats by grip (light blue, green, purple), and other brands use their own labels, but the three strengths line up across the category. A standard 12 x 12 inch mat covers card panels and scrapbook pieces; a 12 x 24 inch mat takes long banners and full-width borders for a 12 x 12 page layout.
A brand-new mat is often stickier than its label suggests. Pressing it a few times against a clean cotton T-shirt takes the edge off the grip, and patterned paper then comes away without leaving its top layer behind.
Blades and what each one is for
- Fine-point blade: the standard blade for paper, cardstock, vellum and vinyl. Most machines ship with one fitted.
- Deep-point blade: a steeper cutting angle for thick materials such as chipboard, magnet sheet and stamp material.
- Knife and rotary blades: on the heavier machines, a knife blade for thick chipboard and thin wood and a rotary blade for fabric. Neither is needed for paper crafts.
- Adjustable-depth blades: some machines use a blade whose depth you set by turning a collar, either by hand or automatically from the software. The depth then becomes one of the values in your test.
Blades wear without warning. The first sign is usually fuzzy edges on cardstock or small inner pieces that stay attached, long before anything looks wrong with the tip, so keep a spare and swap it when a setting that used to work stops working. Several of the symptoms in the page on failed cuts and stuck pieces look the same on an electronic cutter, and a worn blade is the first suspect for most of them.
File types that open, and the ones that need work
Vector files such as SVG and DXF hold lines, and lines are what a blade can follow. They open at full quality at any size. Some software editions limit which vector formats will import, so a file that refuses to open may need the paid edition or a different export.
Raster images, PNG and JPG, are pixels. The software has to trace them into cut lines first, which works well on bold silhouettes and badly on photos. Raster images do have one strong use: print then cut. The software adds registration marks to the page, a home printer prints the image with those marks, and the cutter’s optical sensor reads the marks and cuts around the printed artwork. Stickers, printed tags and colored toppers come out of that workflow.
Run a test cut before every new material
Electronic cutters let you change several values, and the presets that ship with the software are a starting point. The values inside those presets and the names in the menus change with software updates, so a custom setting saved last year may behave differently today. That is the strongest argument for a test cut, which takes two minutes and one corner of a sheet.
- Place a small test shape (a star inside a circle works well) in the top corner of the design, away from the real job.
- Cut only that shape on the actual cardstock you plan to use.
- Before unloading the mat, lift an edge of the cut with a weeding hook. A clean, fully cut shape that lifts away while the mat surface shows only a faint line is the target.
- If the shape is still attached, increase the pressure or force one step, or add a pass. If the blade has scored deep grooves into the mat, reduce the pressure.
- If the edges are torn or ragged, slow the speed down and check the blade before raising the pressure.
- Save the working combination as a custom material under a name that includes the paper, for example “kraft 80 lb smooth”.
Intricate cuts such as lace borders and thin script also respond well to a slower speed even when the pressure is right. Scoring lines for folds go through the same test: a scoring tool or wheel should press a groove that folds crisply without cracking, which matters most on pop-up cards, where every fold has to land exactly on its line.
Getting paper off the mat in one piece
Lift the paper the wrong way and a perfect cut curls into a tube. Turn the mat upside down on the table and peel the mat away from the paper, bending the mat and keeping the paper flat. Small pieces come off with the thin spatula slid flat underneath them. Scrape paper fibers off the mat after each job, put the clear cover sheet back on, and the grip lasts much longer. Once cardstock starts lifting at the corners during a cut, the mat is finished for cardstock, but it still holds lightweight paper and vellum for a while.
Questions crafters ask
Can an electronic cutter cut chipboard?
Some can, with a deep-point or heavy-duty knife blade and several passes; lighter models stop at heavy cardstock and thin chipboard. The material list in the machine's software shows what that particular model is built to handle.
Why does cardstock tear on intricate designs?
The usual causes are a dull blade, a speed that is too high for fine detail, or cardstock with loose fibers. Fit a fresh blade, slow the cut down, and switch to a smooth, dense cardstock before changing anything else.
Why don't my print-then-cut lines line up with the printed image?
The sensor misread the registration marks or the printer scaled the page. Print at 100 percent or actual size, avoid glossy paper that reflects light onto the marks, and cut in a room without a lamp shining straight onto the machine.
Do I have to buy cut files?
No. The design software draws shapes and sets text in any installed font, and SVG files from other sources import into most programs. Check the license on downloaded files before cutting them for anything you plan to sell.
More in Die Cutting Machines Guide for Beginners, From Manual Rollers to Electronic Cutters