My Creative
Classroom

Distressing Paper: Inking Edges, Sanding, Crumpling, Tearing, Aging

Mixed Media Level: First project Published

On the table

  • Brown or gray dye ink pad, such as a Distress Ink in an antique tone
  • Blending tool with foam pad, or a blending brush
  • Sanding block or sandpaper, 220 grit
  • Edge distresser tool, or the back of a scissor blade
  • Core-dyed or double-sided patterned cardstock
  • Small spray bottle with water
  • Black tea bags or instant coffee (for staining)
  • Heat tool

Distressing is a set of ways to fake time. Each one imitates a different kind of wear, and picking the right one depends mostly on the paper in front of you.

Method Looks like Works best on Time
Inked edges Handling, dust, age at the borders Any paper and cardstock A minute per panel
Sanding Rubbed, faded print Patterned paper with a white core, core-dyed cardstock A few minutes
Scraped edges Frayed, fibrous borders Cardstock and heavy patterned paper A minute
Crumpling Folded and carried around Thin paper, text weight A few minutes plus flattening
Tearing Ripped from a book or a larger sheet Any paper; direction matters Seconds
Tea or coffee stain Yellowed, water-marked Thin, absorbent paper An hour including drying

Most pieces combine two or three. A torn strip with inked edges, or a crumpled panel with sanded corners, looks more natural than one method pushed hard.

Inking the edges

Inked edges are the quiet base of almost every distressed look, and they are often enough on their own for a card. Brown and gray dye inks give soft age, and Distress Ink, the generic name most crafters use for that type, stays workable long enough to blend smoothly.

There are two ways to get ink on the edge. The quick one is to drag the edge of the paper directly across the ink pad, holding the paper at an angle so only the border touches. It leaves a strong line. The softer way is to load a blending tool, tap off the excess, then start the tool on your craft mat and move it onto the paper edge in small circles. Starting off the paper keeps a hard edge of ink from landing on the panel.

A few drops of water flicked onto the inked edge, then dried with a heat tool, leave lighter water spots where the ink has moved. For more on dye, pigment and chalk inks and how each dries, see the stamp inks guide.

Sanding and scraping

Sanding works on paper with something different underneath. Rub a 220 grit sanding block lightly across the printed side of patterned paper, focusing on the edges and corners, and the print wears down to the white core in patches. Core-dyed cardstock, colored all the way through, gives a softer effect where the surface just goes duller.

Use light strokes in one direction. Heavy sanding on thin paper wears straight through it.

Scraping gives a frayed edge. Hold an edge distresser or the back of an open scissor blade at a steep angle to the paper edge and pull it along, scraping toward you. The fibers lift and curl into a soft, rough border. Running an ink pad over a scraped edge darkens the lifted fibers more than the flat surface around them, which makes the fray easy to see from across a room.

Crumpling and flattening

Crumple a sheet into a tight ball, open it, crumple it again, then flatten it by hand. Thin paper works best; heavy cardstock cracks along the folds and stays lumpy.

Lightly mist the crumpled sheet with water before inking and the creases absorb more color. Brush a blending tool loaded with brown ink across the surface, without pressing, and the ink catches on the raised ridges of every fold. The result looks like an old map or a letter carried in a pocket for years.

To flatten it again, press it between two sheets of scrap paper under a heavy book overnight, or iron it on a low, dry setting between scrap sheets. Some creasing always remains, and it should.

Tearing with and against the grain

Paper has a grain, the direction most of its fibers run. Tear along it and the tear runs fairly straight; tear across it and the tear wanders. To find the grain, bend a sheet gently both ways: it gives more easily when the fold runs with the grain.

The direction you pull matters too. Hold the paper with the printed side up and tear the strip toward you, and the torn edge shows a narrow white band of fibers on the front. Tear it away from you and the white band ends up on the back, so the edge looks cleaner. For a scrapbook page, a torn photo mat or a strip of patterned paper with that white band reads as a deliberate border, the kind used on scrapbook page layouts.

Tea and coffee staining

Brew a strong cup of black tea with two or three bags, or dissolve a spoonful of instant coffee in hot water. Let it cool a little, then either dip thin paper in it or brush it on. Coffee gives a warmer, browner tone than tea; both darken unevenly, which is exactly the look.

Lay the wet paper flat on a towel or a baking sheet to dry, then press it under weight. For darker rings, set the damp tea bag down on the paper for a few seconds before it dries.

Stained paper carries acid from the tea or coffee into the fibers. Keep it out of direct contact with photographs and away from the archival pieces of a scrapbook; acid-free mats and sleeves, explained under photo-safe supplies, keep the two apart. These aging methods all belong to the final layer in the mixed media order, after paint and collage are dry.

For a matched set of aged papers, stain several sheets in the same tea bath at once. Each one comes out a little different, and they still look like they belong to the same old book.

Questions crafters ask

Which ink color gives a vintage look?

Warm browns and soft grays. A medium brown dye ink reads as age on almost any color of paper, while black edges look harsh unless the whole design is dark.

Why does sanded paper look white instead of colored?

Most patterned paper has a white core under the printed surface. Sanding exposes it, which is the point; for a color-on-color effect, use cardstock dyed all the way through.

Can I make paper look old without coffee or tea?

Yes. Ink the edges with brown, crumple and flatten the sheet, then blend the same ink lightly over the creases. Mist a few drops of water on the ink for faint stains.

Is distressed paper safe next to photos?

Tea and coffee leave acids in the paper. Keep stained sheets from touching photos directly, and use a photo-safe mat between them.

More in Mixed Media Art Techniques for Beginners, From the Gesso Ground to Distressed Edges